Moto-Services Vintage Brake Service
When I received this 1982 Yamaha the front brakes were seized with corrosion.
One of the least glamorous tasks involved in getting an old bike back on the road is rebuilding its brakes. Even when a 1970s to 1990s Japanese bike is otherwise properly stored, changing the brake fluid is often overlooked. In addition to being mildly corrosive and potentially harmful to paint and finished surfaces, DOT 3 and 4 hydraulic brake fluid is hygroscopic, meaning that it absorbs water from the air. When a bike sits, particularly outdoors, water absorbed by the fluid acidifies and eventually begins to corrode the metal parts in the brake system and attack the rubber seals. At the same time oxygenation is slowly causing the rubber hoses to harden. When the time comes to resurrect the machine, if the master cylinder can even pressurize the system, quite often the brake calipers will seize and lock the wheel. That was the case when I took delivery of my 1982 Yamaha Seca XJ650RJ from the seller in Michigan. We had to lift the front wheel onto a moving dolly in order to roll the bike into the shop, where I was able to carefully pry the front caliper pistons back into their bores with a screwdriver. Further inspection made it clear that a front brake rebuild was required?there was dark, goopy fluid in the system and corrosion in the master cylinder, reservoir and around both front caliper pistons. Fortunately none of this was a surprise?I knew the bike had been sitting in a shed in Michigan fo...
-------------------------------- |
|
Speed Read: A rare Honda Monkey Gold Edition and more
29-04-2024 07:47 - (
motorcycle )